• kboos1@lemmy.world
    link
    fedilink
    English
    arrow-up
    15
    ·
    14 days ago

    I just updated my BIOS on a 6yo motherboard because I upgraded the processor. Went up about 15 updates that had to be done one by one and took all day. I only broke it once because there are no guides or manuals on how to setup the USB drive from one version update to another. Had to figure out how to load a recovery image from another guide for another MB that they did create a guide for. Darn you Gygabyte for your poor documentation.

  • A_Random_Idiot@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    14 days ago

    I’ve never had a failed bios flash.

    but i still sit in pants shitting terror every time i have to do one. it doesnt help that power isnt the most stable thing where i live.

    • grue@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      14 days ago

      I’ve got plans to install Libreboot on a server motherboard I have. On that one, the BIOS chip is actually socketed, so I can get an upgraded chip with 16MiB instead of 2MiB, use an external device like a Raspberry Pi flash Libreboot on it, and then install it on the board.

      No worries about bricking the board unless I break the socket or something, LOL!

      https://libreboot.org/docs/install/spi.html

  • Blaster M@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    14 days ago

    The standard should be an A/B partition system, lile a lot of phones do. Flash B while booted to A, or Flash A when booted to B. If a flash fails, you can still boot the previous firmware.

    Put your hands down, I know about security. The point is after the flash is successfully booted on the new firmware, it can be copied to the other partition to eliminate a regressive boot to old firmware.

  • 𝕾𝖕𝖎𝖈𝖞 𝕿𝖚𝖓𝖆@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    14 days ago

    I was trying to put a new SSD in my laptop recently, but it didn’t recognize it. So I figured it needed a firmware update. I figured I could do this in BIOS, but nope! The updater was in .exe format.

    Fortunately, I had an old Windows 8 install disc laying around. I had to install Windows 8 for all of 30 minutes to update my BIOS so it would take my new SSD. And it still didn’t work! Well at least the BIOS is as up to date as it can be.

  • TurboWafflz@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    14 days ago

    this is why I love msi motherboards, they have a little separate microcontroller that can flash the bios from a USB drive in an emergency

  • Shayeta@feddit.org
    link
    fedilink
    English
    arrow-up
    2
    ·
    13 days ago

    Unplug power, remove coin battery, connect the BIOS chip to a raspberry pico using a SOIC8 clamp, connect pico to your laptop, flash directly.

  • Impractical_Island@lemmy.world
    link
    fedilink
    arrow-up
    1
    arrow-down
    1
    ·
    14 days ago

    Don’t put dogs in dogs they don’t bark well my teacher said. Well, my teacher is dead, but I still don’t understand a damn thing that deep swamp swimming bish thought was kosher up outside the motor pit, least when there no gators in tradenum. Post doc do hit like a frolic, you know, y’know?